APS 12.5" Keymod Spyder SDU Gelsoft Blaster

$635.00
SKU: ASR115-R1

Description

Do you like the TE Spyder but are after something a little longer, then this gel blaster is for you. 

The full metal receiver is coated with a matte black finish and features stamped trademarks for a realistic look and feel. The full length 20mm top rail is great for any type of optics you decide to use and the 12.5" Keymod style rail comes complete with 3 additional accessory rails for lights, lasers, vertical grip, and other tactical add-ons. A retractable crane stock finishes off the rear of the blaster while an aggressive mock compensator finishes off the front.

The eSilveredge gearbox comes with a SDU2.0 is a programmable ECU chips that is being used in eSilveredge Gear Box (This controls your select fire options)

Shooting approximately 280-300 FPS on TEH White Gels!

DISCLAIMER
Do not upgrade any part of your toy gel blaster as this will void the warranty. Upgrades refer to pulling any of the blaster apart or opening it up, changing springs or upgrading the battery from 7.4v to an 11.v battery. 

About APS

APS Limited was established in 2001. APS started by specializing in designing and building Simulation Training Equipment (Real Action Markers & Powder Balls for training simulation). APS - the three words stand for Accuracy - Pneumatics - Shooting. With their knowledge and experience, APS launched a new product line - Electronic Blow Back (EBB) products to spur the current Gelsoft Market. Since entering the Gel Blaster industry their line of Gel rifles, pistols and accessories have been incredibly popular.

Features

Metal Upper & Lower Body APS eSilveredge 2.0 SDU Metal Gearbox
Aluminium Keymod 12.5" Handguard Quick Change Spring System with four locking legs instead of two
Steel Flash Hider
Polished & Buffed Housing Surface
Compatible with Gen 8 Magazines Fibre Optic Side Mounting Sights
Collapsible/Adjustable CQB Style Stock  Length: tbc
Pistol Grip is made of a reinforced polymer.  Weight: tbc

 

 

Specs

Model: APS 12.5" Keymod Spyder SDU 2.0 Bushing/Bearings: 8mm Bushings 
Recommended Gel Type: AKA/ TEH Ultra  Gears:  APS Cast 18:1 Metal Gears
Type: Electric Gel Blaster (AEG) Motor: 480 Long Shaft Motor
Inner Barrel Size: Length TBC / 7.5mm ID Spring:  M100
Barrel Type: Polished Stainless Steel Rounds Per Second: 9 Rounds Per Second
Battery Source: Mini Tamiya 7.4v Velocity: 280+ TEH Hard Gel
Gear Box: eSilveredge 2.0 with SDU Barrel Thread Type: +14
Fire Modes: Safe/Semi/Full Auto Magazine Type: Gen 8 Magazine
Hop up:  Gen 10 Reverse Thread Hopup Magazine Capacity: 200+ gel rounds
Blaster Length: tbc Handguard: 12.5" Alloy Keymod Handguard

 

 

ESILVEREDGE GEARBOX SDU INSTRUCTIONS/SPEC

SDU2.0 is a programmable ECU chips that is being used in eSilver Edge Gear Box

Simply pressing down the button underneath of the gear box, user can switch its fire selector modes (total 5 different modes). No external device or trigger control are needs, it is easy to program anytime and anywhere by the user.

First, connect your AEG with a fully charged battery (7.4V) Battery. The usuaal battery that you used when your play.

Second, find the switch button. The button is located underneath of the gear box reachable from the magwell of the lower receiver.

How to change the mode?

Step 1) Press and hold the button. You will see a Red LED light on, hold till you see its blinking 2 times, release the button to accept the changes. Repeat Step 1 to continue your choice.

Choice of Firing Mode:

Mode 1 (Default)

Safe

Semi

Auto

Mode 2

Safe

Semi

Three Burst

Mode 3

Safe

Two Burst

Auto

Mode 4

Safe

Three Burst

Auto

Mode 5

Safe

Three Burst

Nine Burst


**Double click the button or unplug the battery anytime to reset the ECU back to its factory settings (Mode 1) **

Use of Advanced S.D.U.™ chips

The S.D.U. chipset that used in eSilver Edge Gear Box has a unique function that stop the gearbox from further damage if electric current is too high. Simply to say, electric current / Ampere will increase if there is a malfunction inside the gearbox. For instant, bad motor, damaged gears or short circuit. When our S.D.U. detected more than 5 trigger presses in exceed Amps, the whole gearbox will shut down to prevent further damage. User has to disconnect and then reconnect the power supply to reboot the gearbox, we strongly recommended user to check the internal immediately if mal-function happened.

Micro Switch Trigger

eSilver Edge Gear Box standard comes with micro switch trigger works together with the S.D.U.,  providing you an instant trigger response when shooting. Base on our testing, the response time of the switch is just 0.02 sec and designed for two hundred thousand press. With the short stroke design of the trigger, it is unbelievable fast and you won’t feel any trigger delay when shooting.

    In the Box

    1x APS 12.5" KEYMOD TE SPYDER SDU 2.0  1x Gen 8 Magazine - Black
    1x Plastic 14mm Left Handed Thread Orange Flash Hider 1x Alloy 14mm Left Handed Thread Flash Hider - Black
    1x Safety Glasses

    ** Battery, Gels and Charger not included

    Tactical Edge Hobbies ships Australia Wide, for more information regarding your states specific laws, please consult the FAQ section of our website.

    Due to the nature of dangerous and hazardous goods, we cannot offer free shipping to items with dangerous goods in them. We strongly recommend placing a separate order for products that are hazardous or dangerous.

    All our products are wrapped in discrete black wrap and given the upmost care for shipping. We ship via Australia Post or Courier where possible.

    If you are located in Southern Australia, please note that your product may need to have a nominated location to be sent to for processing. E-Mail info@tacticalege.com.au if you have any questions or wish to place a order.

    Customer Reviews

    Based on 2 reviews Write a review
    x