Custom made CNC 10.04:01 ratio Single Sector gear set.

The fastest gears currently available on the market in Single sector.

CNC machined from hardened SCM440 steel made to perfection with straight cut gears for reduced loading and for increased battery life and reduced wear.

Manufactured from hardened SCM440 (Chrome-molybdenum Alloy Steel) with a brinell hardness of 197 which ensures these gears are as strong and as hard as possible to increase life and reduce wear.

10.04:01 ratio gears are the fastest we can go in single sector.  On a fast motor you can run up to around 51-55 rps on a single sector gear.  That's faster than most DSG builds with out the dramas of everything dual sector gears bring.

- Running a high torque motor at around 20000rpm will run at roughly 27rps

-A 30000rpm motor will put out around 32rps

-A 40000rpm motor will put down a stonking 42 rps

Then if your really keen, crack onto 50000rpm motors for  high 50s to 60 rps on SINGLE SECTOR gears.  These figures will all vary based on battery volatge, C rating output, and soeing sizes

We would highly recommend running these high speed gears with our high speed tappet plates

Suits V2 and V3 style gearbox's - gelball compatible

We highly recomend using high strength lock tight on the sector gear grub screws. These have not been set with loctite from new as some builders want these for DSG.

These gears must be lubricated with a thin but complete coating of high quality bearing and gear grease. To much grease will cause the grease to be thrown off the gear through centrifugal forces and end in the gears having no lubrication. We highly recommend Nulon Xtreme Performance Grease with PTFE (L80) which is a blend of Polytetrafluoroethylene (PTFE) fluorocarbon particles in a specially prepared lithium-based, water-repellent grease. 

L80 keeps water and dust out while a plating of PTFE is applied to the mating surfaces under working conditions. Seal performance is improved and operating temperature reduced, resulting in less grease "throw". L80 is the perfect grease for our CNC bushes and gears.

L80 has a continuous temperature operating range of -9°C to 150°C

Please research and follow the advice of your states regulations on Gel Blasters before making a purchase. Unfortunately, we are not liable for any confiscated goods or damages in transport as a result of not heeding these laws.

Standard packing and handling times are between 1-3 Business days and from there, standard shipping times from Brisbane. During peak season, big sales (like 20-30% off)  and special occasions such as Christmas and Fathers day there will be delays in shipping and we reserve the right to exceed the above guidelines on occasion. 

For express post shipping times please see the Australia Post website for more details. 

Once an order has been dispatched, it is in the hands of Australia Post and we will not be held responsible for any items that go missing and can not provide any discounts on new products that must be purchased to replace the missing items. Please call Australia Post if there are any issues with the delivery of your order.

Our contract ends once the order has been collected by Australia Post.

Free shipping for all orders over $50

For more information on our shipping policy, please click on the following link.

For more information on our refund policy, please click on the following link.

Charging Batteries

Do not leave batteries unattended whilst charging and take off charge when they have completed charging.

When charging the batteries, we recommend charging them between 1-4 hours.
When they are charging the light/s will flash and once it is fully charged, the light/s will turn a solid red or green.

Also once you start to hear the battery getting flat, please recharge it as running it flat can damage the cells.

Soaking & Storage of Gels

When soaking the gels, they need to be soaked fully submerged in water from the tap for a minimum of 5-6 hours.

Once they have fully grown you can leave them in the water and keep them in or out of the refrigerator.

When you are ready to use them just drain of any excess water with a strainer before you feed them into the mag but do not dry them as they need to be lubricated to work properly.

You can store gel balls in a bucket of water with a lid for up to 3 months before they start to go super soft. We recommend if you do this to change the water every couple of weeks.