APS Phantom Extremis MK3 SDU Gel Blaster

$655.00 Regular price $700.00

get it now with for $229.25 AUD + 3 payments of $141.92 AUD Learn more

Description

Let us introduce you to our exclusive PLATINUM range of Gel Blasters.

Introducing the Phantom Extremis Mark III. The Phantom Extremis Mark III 2.0 features a eSilver Edge gearbox, full metal construction (including receiver), cantered iron sights, a beautiful red and black finish & 280+ FPS on 7.4v battery.

DISCLAIMER
Do not alter any part of your toy gel blaster as this will void the warranty. Alterations refer to pulling any of the blaster apart or opening it up, changing springs, upgrading the barrel to alloy, upgrading the battery from 7.4v to an 11.v battery or painting the gel blaster. 

Features

Milled Receiver

PER-MKIII is a tactical rifle that built for the user. It is a light weighted rifle where the receivers are structurally milled for reduced weight and aesthetics. The CNC machined upper receivers allow user can see the gear box inside from its opening.

M-LOK Hand Guard

PER MKIII used slim and light weighted hand guard with modular locking accessory mounting system (M-LOK) designed by Magpul Industries.  The hand guard has a Hand Stop implied, which give your support hand a low profile anchor point on the forend.

Quick change spring system

Same as previous Models, the lower receiver comes with quick change spring features, user can simply remove the buffer tube and reach the gearbox’s spring guide to do spring replacement easily. Save the effort on dissembling the whole gun and take the gear box out from the receiver for spring change.

Advanced Pistol Grip

Phantom overload pistol grip is used in our PER Rifles. This Non-Slip EVA plastic grip in the front and rear increase the comfort of holding it. The pistol grip has shock absorption deign in the interior that reduce the vibration generated from the start up of the motor, thus relatively improve the motor performance and significantly reduce the battery loading to 10.5 Ampere.  

Full Ambidextrous Design

Magazine release catch, Fire Selector and charging handle are all ambidextrous design benefits both left handed or right handed.

Other cool features

Flat Trigger is used in these guns which gives you an enhance control and lighter perceived weight when triggering. Stylish Tron stock is used. The stock tube is made by high grade aluminum. As long as the button on the stock is pressed, the back plate can be removed and you can install lithium battery inside the tube easily. The weight of this stock is less than 350g; compare to other retractable stock that use buffer tube, our light weighted stock is more practical in use.

eSilver Edge Gearbox

Quick Change Spring System
The Quick Change Spring Guide has 4 locking legs instead of 2.
Polished and Buffed housing surface.
8mm Bearing Bushings, Bearing Piston Head and Bearing Spring Guide.
Mosfet Installed

Specs

  • Gel Type: 7-8mm
  • Inner barrel size: 7.5mm
  • Barrel Type: Polished Stainless Steel
  • Battery Source: 7.4 Li Po Battery with Mini Tamiya
  • Alloy Silver Edge Gear Box Installed
  • 8mm Metal Bearings
  • M100 Spring
  • 480 Long Shaft Motor
  • Velocity: 280+FPS
  • Fire Selector: Safe / Semi Auto / Full Auto
  • Metal Hand Guard and ABS Gen 8 Magazine 
  • Metal Gear Box, Receiver, Stock, Handguard, Outer Barrel.
  • Pistol Grip is made of a reinforced polymer. 
  • Magazine Capacity: 250 Gels
  • Suitable Hopup: DK-Gen 10 Reverse Thread Hopup 

** Battery, Gels and Charger not included

    In the Box

    • 1 x Phantom Extremis MK3 2.0
    • 1 x Gen 8 Magazine - Black
    • 1 x Plastic 14mm Left Handed Thread Orange Flash Hider
    • 1 x Alloy 14mm Left Handed Thread Flash Hider - Black
    • 1 x Safety Glasses

    ** Battery, Gels and Charger not included

    ESILVEREDGE GEARBOX SDU INSTRUCTIONS/SPEC

    SDU2.0 is a programmable ECU chips that is being used in eSilver Edge Gear Box

    Simply pressing down the button underneath of the gear box, user can switch its fire selector modes (total 5 different modes). No external device or trigger control are needs, it is easy to program anytime and anywhere by the user.

    First, connect your AEG with a fully charged battery (7.4V) Battery. The usual battery that you used when your play.

    Second, find the switch button. The button is located underneath of the gear box reachable from the magwell of the lower receiver.

    How to change the mode?

    Step 1) Press and hold the button. You will see a Red LED light on, hold till you see its blinking 2 times, release the button to accept the changes. Repeat Step 1 to continue your choice.

    Choice of Firing Mode:

    Mode 1 (Default)

    Safe

    Semi

    Auto

    Mode 2

    Safe

    Semi

    Three Burst

    Mode 3

    Safe

    Two Burst

    Auto

    Mode 4

    Safe

    Three Burst

    Auto

    Mode 5

    Safe

    Three Burst

    Nine Burst


    **Double click the button or unplug the battery anytime to reset the ECU back to its factory settings (Mode 1) **

    Use of Advanced S.D.U.™ chips

    The S.D.U. chipset that used in eSilver Edge Gear Box has a unique function that stop the gearbox from further damage if electric current is too high. Simply to say, electric current / Ampere will increase if there is a malfunction inside the gearbox. For instant, bad motor, damaged gears or short circuit. When our S.D.U. detected more than 5 trigger presses in exceed Amps, the whole gearbox will shut down to prevent further damage. User has to disconnect and then reconnect the power supply to reboot the gearbox, we strongly recommended user to check the internal immediately if mal-function happened.

    Micro Switch Trigger

    eSilver Edge Gear Box standard comes with micro switch trigger works together with the S.D.U.,  providing you an instant trigger response when shooting. Base on our testing, the response time of the switch is just 0.02 sec and designed for two hundred thousand press. With the short stroke design of the trigger, it is unbelievable fast and you won’t feel any trigger delay when shooting.


    Please research and follow the advice of your states regulations on Gel Blasters before making a purchase. Unfortunately, we are not liable for any confiscated goods or damages in transport as a result of not heeding these laws.

    Standard packing and handling times are between 1-3 Business days and from there, standard shipping times from Brisbane. During peak season, big sales (like 20-30% off)  and special occasions such as Christmas and Fathers day there will be delays in shipping and we reserve the right to exceed the above guidelines on occasion. 

    For express post shipping times please see the Australia Post website for more details. 

    Once an order has been dispatched, it is in the hands of Australia Post and we will not be held responsible for any items that go missing and can not provide any discounts on new products that must be purchased to replace the missing items. Please call Australia Post if there are any issues with the delivery of your order.

    Our contract ends once the order has been collected by Australia Post.

    Free shipping for all orders over $50

    For more information on our shipping policy, please click on the following link.
    https://tacticaledge.com.au/pages/shipping-policy

    For more information on our refund policy, please click on the following link.
    https://tacticaledge.com.au/pages/refund-policy

    Charging Batteries

    Do not leave batteries unattended whilst charging and take off charge when they have completed charging.

    When charging the batteries, we recommend charging them between 1-4 hours.
    When they are charging the light/s will flash and once it is fully charged, the light/s will turn a solid red or green.

    Also once you start to hear the battery getting flat, please recharge it as running it flat can damage the cells.

    Soaking & Storage of Gels

    When soaking the gels, they need to be soaked fully submerged in water from the tap for a minimum of 5-6 hours.

    Once they have fully grown you can leave them in the water and keep them in or out of the refrigerator.

    When you are ready to use them just drain of any excess water with a strainer before you feed them into the mag but do not dry them as they need to be lubricated to work properly.

    You can store gel balls in a bucket of water with a lid for up to 3 months before they start to go super soft. We recommend if you do this to change the water every couple of weeks.

    x