Muzzletek m+ Pistol/Rifle Hopup

$60.00

Description

Forget special glow mags! The Muzzletek M+ comes with an adapter on the front of the hopup so you can attach an Acetech tracer unit!

Made with a CNC alloy outer casing, this hopup is tough and will add that much needed distance to your new co2 pistol as well as your M4 or AK using the included adaptor! Designed and made in Australia! 

  • Hopup Material: CNC alloy outer case with plastic inner
  • Adaptor Material: CNC alloy
  • Thread of main hopup: M12 CCW
  • Thread of adaptor: M14 CCW

Adjustment: Adjust through grub screw on the front of the hopup

Please note the Muzzletek Hop up does not suit the APS ACP (Glock Style) Frame or the Bumblebee Pistol as the outer barrel is different.

Replacement Hop up Inserts are available separately see options

Installation Guide

Pistol

  1. Screw on the outer casing first (counter clockwise thread) all the way until it is on the pistol firmly
  2. Insert the inner hopup part into the casing making sure the hopup tongue is top dead centre
  3. Tighten up the grub screw in the rear of the casing until it becomes firm. This holds the inner hopup part in place.
  4. Adjust the amount of hopup by screwing in or out the hopup adjustment grub screw at the front of the hopup until you have the correct amount of backspin
  5. Install the tracer adapter if required then screw on your Acetech tracer unit

M4/AK

  1. Screw the hopup onto the adaptor
  2. Screw assembly onto your blaster until tight then screw in grub screw that is on the side of the adaptor
  3. Insert the inner hopup part into the casing making sure the hopup tongue is top dead centre
  4. Tighten up the grub screw in the rear of the casing until it becomes firm. This holds the inner hopup part in place.
  5. Adjust the amount of hopup by screwing in or out the hopup adjustment grub screw at the front of the hopup until you have the correct amount of backspin
  6. Install the tracer adapter if required then screw on your Acetech tracer unit

Please note these are different fitment to our first generation of Muzzletek and these will also require modification to fit on our first shipment of APS Pistols that we have sold from June to August 2020. The current Pistols sold from September 2020 do not require modification

Please research and follow the advice of your states regulations on Gel Blasters before making a purchase. Unfortunately, we are not liable for any confiscated goods or damages in transport as a result of not heeding these laws.

Standard packing and handling times are between 1-3 Business days and from there, standard shipping times from Brisbane. During peak season, big sales (like 20-30% off)  and special occasions such as Christmas and Fathers day there will be delays in shipping and we reserve the right to exceed the above guidelines on occasion. 

For express post shipping times please see the Australia Post website for more details. 

Once an order has been dispatched, it is in the hands of Australia Post and we will not be held responsible for any items that go missing and can not provide any discounts on new products that must be purchased to replace the missing items. Please call Australia Post if there are any issues with the delivery of your order.

Our contract ends once the order has been collected by Australia Post.

Free shipping for all orders over $50

For more information on our shipping policy, please click on the following link.
https://tacticaledge.com.au/pages/shipping-policy

For more information on our refund policy, please click on the following link.
https://tacticaledge.com.au/pages/refund-policy

Charging Batteries

Do not leave batteries unattended whilst charging and take off charge when they have completed charging.

When charging the batteries, we recommend charging them between 1-4 hours.
When they are charging the light/s will flash and once it is fully charged, the light/s will turn a solid red or green.

Also once you start to hear the battery getting flat, please recharge it as running it flat can damage the cells.

Soaking & Storage of Gels

When soaking the gels, they need to be soaked fully submerged in water from the tap for a minimum of 5-6 hours.

Once they have fully grown you can leave them in the water and keep them in or out of the refrigerator.

When you are ready to use them just drain of any excess water with a strainer before you feed them into the mag but do not dry them as they need to be lubricated to work properly.

You can store gel balls in a bucket of water with a lid for up to 3 months before they start to go super soft. We recommend if you do this to change the water every couple of weeks.

x