Want to battle it out as a Jedi or a Sith? We have you covered with our new line of light sabers!
The light saber features an Aluminium Hilt, a Polycarbonate Blade, RGB 7-way Colour Change & Clash and Blaster Sounds. The sabers can be used to duel with as well for the ultimate fun with mates!
- The battle saber supports duelling.
- 7-Way Colour Modes (Red, Green, Blue, Light Blue, Orange, Pink/Purple, Cold White)
- Has flash on clash and blaster mode.
- Ultra loud sound and high light.
- The blade can be removed.
Please charge the sasaber at least one time of each month.
Please do not open or take down the hilt of battle sabre.
Material of hilt: Aluminium alloy 6061
Material of blade: Removable PC (Poly Carbonate)
Size of hilt: 25cm
Size of blade: 1.7mm thickness 75cm Length 7/8 inch size
Total length: 100CM
Light: 9watts High Light LED RGB 5watts led light
Speaker: 2watt 4ohm
Battery: 1500mah RGB 3000mah
Sound: 3 sets loud sound fonts plus mute function and blaster
Colour of hilt: as picture
Colour of blade: Single high light and have 7 colours for choice (Cold white, Red, Orange, Green, Blue, Ice blue, Pink/Purple )
Time of working : 50-60 mins / full charge
Time of charge : 5-6 hours
Features: Blaster, lock-up, colour, flash on clash.
How To Play
1,Switch: short press start (vibration 1 loosening), long press 4 seconds to shut down (vibration 5 times).
2,Switching light mode: after boot, short press switch light effect (vibration 1 loosening), then cycle.
3,Light mode and switch: after boot, press 2 seconds to loosen (vibrate 2 times), open or close the sword mode.
4,When the sword is opened, touch lightly (vibration 1 times) and switch the sword's light effect.
5,Volume high school low switch: after boot, press 3.5 seconds to loosen (vibrate 4 times), switch the voice loud, medium and small in turn.
6,Light and colour switch: after boot, press 3 seconds to loosen (vibrate 3 times) to switch colour.
7.Click to turn on the battle sabre, long press for three seconds to turn off the battle sabre.
8.When sabre is on, tapping button plays blaster sound, holding button for 1 second and tapping plays lock up on a loop, tapping button again ends lockup loop.
9.Holding button for 2 seconds and long press to select colours, release the button to confirm.
10.When sabre is off long press for 1 second and release the button to select sound fonts. Long press for 1 second go to the next sound font.
Connect the DC end of the charging line to the battle saber charge hole, and the USB end are connected to the charging seat of the output parameter 5V1A of the equipment (adapter, PC, cell phone charger, etc.) with a USB port. When charging, the button aperture "breathe" starts to recharge, and the battery is filled with light. The charging time is usually 2-3 hours. The charging seats are different and charging time is different.
3 sets of sound effects: each set has the sound effect of the switch machine, the standby (background) sound effect, the swords effect, the sound effect, the sound effect, the switching sound effect, the low power sound effect and the charge effect...
Light effect: flame mode, full bright mode, high and low brightness regulation, breathing mode, heartbeat mode, flickering mode, explosive flashing mode spelling sword;
Volume regulation and mute mode: volume high school low regulation, mute function;
Memory function: light effect memory, sound effect memory;
Vibration special effect: switch machine vibration, switch vibration.
1.This product is a LED luminous toy. Long time direct vision may affect your eyesight.
2.The left and right screws of the handle of the hilt are fixed, and can be rotated.
3.The screws on the handle are used for fixing internal fittings. No dismantling is allowed.
4. Please do not charge the product with more than 5v-1A power supply.
Do not put battle sabres in water, charge them at least once a month.
Tactical Edge Hobbies ships Australia Wide, for more information regarding your states specific laws, please consult the FAQ section of our website.
Due to the nature of dangerous and hazardous goods, we cannot offer free shipping to items with dangerous goods in them. We strongly recommend placing a separate order for products that are hazardous or dangerous.
All our products are wrapped in discrete black wrap and given the upmost care for shipping. We ship via Australia Post or Courier where possible.
If you are located in Southern Australia, please note that your product may need to have a nominated location to be sent to for processing. E-Mail email@example.com if you have any questions or wish to place a order.