SKD E018S Electric Gel Blaster Pistol - 14.8v

SKD E018S Electric Gel Blaster Pistol - 14.8v

Introducing the newest model of the SKD ... The G-Series 18 E018s Gel Blaster Pistol.

Featuring a flashlight, single and auto firing modes, mag primer, sturdy nylon build, all black gel blaster and is shooting around 130 FPS give or take. 

This is great for starting out or even as a side arm on the gelsoft field.

Easy enough for kids to use and great fun!

**Orange tip shown for illustration purposes**

Features

• Flashlight
• Single Shot and Full Auto
• Mag Primer
• All Black
• Better Construction than the standard SKD G-Series 18 Auto Gel Blaster Pistol

Specs

• Barrel Length: 7.5cm
• Barrel ID Size: 7.3
• Barrel Material: Plastic
• Gearbox Material: Plastic
• Spring Size: 1.1
• Gear Type: Plastic Gears
• Motor Type: Specific Motor
• Overall Blaster Length: 19cm
• Battery Type: 7.4v Internal 14.8v External (in flashlight)
• Mosfet Y/N: Yes
• Velocity: 130 -/+ FPS
• Suitable Gel: Orange/White/Clear/Green/Blue Gels
• Piston Type: Plastic G18 Cup Piston Cylinder and Nozzle
• Cylinder Head and Nozzle: (Same as Above)
• T-piece: Specific
• Battery Connector: Internal battery with external Battery in Torch
• Ammo Capacity: Approx 35 Rounds
• Magazine Type: Auto G 18 Magazine or Extended Magazine. 

In the Box

• 1x SKD G18 E018S Gel Blaster Pistol
• 1x SKD Magazine
• 1x Gel Bag
• 1x SKD G18 USB Charger
• 1x Torch/battery combo
• 1x Empty Plastic Bottle
• 1x Safety Glasses

Always use the appropriate eye wear and take all reasonable safety precautions when using our products.

Charging Batteries

When charging the batteries, we recommend charging them between 1-4 hours.

When they are charging the light/s will flash and once it is fully charged, the light/s will turn a solid red or green.

Also once you start to hear the battery getting flat, please recharge it as running it flat can damage the cells.

Soaking & Storage of Gels

When soaking the gels, they need to be soaked fully submerged in warm water from the tap for a minimum of 4-6 hours.

Once they have fully grown you can leave them in the water and keep them in or out of the refrigerator.

When you are ready to use them just drain off any excess water with a strainer before you feed them into the mag but do not dry them as they need to be lubricated to work properly.

DISCLAIMER

Do not upgrade any part of your toy gel blaster as this will void the warranty. Upgrades refer to pulling any of the blaster apart or opening it up, changing springs or upgrading the battery from 7.4v to an 11.v battery.