Double Bell M4SS Nylon Gel Blaster

Description

Double Bell M4SS SIR (S-SYSTEM) Metal Gel Blaster - Nylon with Metal Gearbox

Serious firepower & well balanced. This Double Bell M4SS Gel Blaster is made from Nylon but has a metal internal gearbox. 

This is a well-constructed nylon gel blaster rifle that features a full-length top rail and RIS which allows you to add anything from sights to torches and PEQ boxes.

With the handguard being strong nylon and extending along the top of the upper receiver, everything is bolted together really well with next to no shakes or rattles.

 With the internals being conventional V2 there are hundreds of internal upgrades offered on the market to personalize this gel blaster inside and out.

The rail extends over the entire top of the gel blaster, it also has additional rails on the sides and on the bottom of the front end. Features also include a folding rear and front sight.

The battery fits in the handguard that requires a screwdriver to undo 2 push and twist pins.  

Features:

• Type: Automatic, battery operated
• Modes: Semi/Full-Auto, Safety
• Material: Nylon with Metal Internals
• Metal Trigger
• Metal Barrels
• Highest quality nylon and metal materials and craftsmanship
• V.2 Metal Gearbox with metal gears
• The big line diameter Spring
• 18:1 Gear ratio
• Nylon receiver
• Nylon handguard 
• Metal silencer fire cap/tip with built-in hop-up
• Nylon sight
• Metal barrel (with orange fire cap - need to use the included Allen key to remove it)
• INNER BARREL LENGTH: TBC
• Stainless steel Inner Barrel inner diameter size: TBC
• Hop up Included
• Extendable stock
• The charging handle opens the dust cover
• Rails on the top rail and handguard for tactical attachments
• PLUG TYPE: Mini Tamiya
  
• BARREL THREAD TYPE: 14mm CCW
• Uses 7-8mm gel balls

• Up to 280- 300 Feet per Second -/+

**Orange tip shown for illustration purposes**

This gel blaster is an oversized parcel when shipped so it will incur a shipping fee depending on the state / territory you reside in.

Specs:

• TYPE: AEG
• LENGTH: 778mm
• WEIGHT: 2408g approx
• VELOCITY(FPS): TBC
• INNER BARREL LENGTH: TBC
• INNER BARREL DIAMETER: TBC
• MATERIAL: Metal+Nylon
• FIRE MODE: Safe/Semi/Full Auto
• COMPATIBLE MAG: Double Bell M4 Magazine
• MAGAZINE: approx 250 rounds
• BATTERY: 7.4v Battery with Tamiya
• HOP-UP: Adjustable
• GEARBOX TYPE: V2 Gearbox
• BEARING DIAMETER: 8mm
• GEARBOX MATERIAL: Metal
• PLUG TYPE: Mini Tamiya
• BARREL THREAD TYPE: 14mm CCW

In The Box:

1x Double Bell M4SS Nylon Gel Blaster
1x Double Bell M4 Magazine
1x Flash Hider/Hopup Combo
1x Gel Packet

**Battery and charger NOT included**

** Blaster may look a little different from the image.

When you purchase a Gel Blaster from Tactical Edge Hobbies, you can be sure that you are purchasing a high-quality, reliable product with a 30-day warranty and a dedicated team of technicians to assist you with what you need.

IMPORTANT INFORMATION

Warning! Choking Hazard Small Parts

This Product Contains Silicone Bead. Not for children under 3 years.

Do not aim at eyes or face.

Always use the appropriate eyewear and take all reasonable safety precautions when using our products.

Charging Batteries

Do not leave batteries unattended whilst charging and take off charge when they have completed charging.

When charging the batteries, we recommend charging them between 1-4 hours.
When they are charging the light/s will flash and once it is fully charged, the light/s will turn a solid red or green.

Also once you start to hear the battery getting flat, please recharge it as running it flat can damage the cells.

 Soaking & Storage of Gels

When soaking the gels, they must be soaked fully submerged in water from the tap for a minimum of 5-6 hours.

Once they have fully grown you can leave them in the water and keep them in or out of the refrigerator.

When you are ready to use them just drain off any excess water with a strainer before you feed them into the mag but do not dry them as they need to be lubricated to work properly.

You can store gel balls in a bucket of water with a lid for up to 3 months before they start to go super soft. We recommend that you do this to change the water every couple of weeks.

DISCLAIMER
Do not upgrade any part of your toy gel blaster as this will void the warranty. Upgrades refer to pulling any of the blasters apart or opening it up, changing springs, or upgrading the battery from 7.4v to an 11.v battery.