IHobby Flash Hider & Hopup Combo

IHobby Flash Hider & Hopup Combo

Wanting to hide your hopup from nasty bumps and also make your blaster look the part? Grab one of our M4 Flash Hiders with the Ihobby Hopup Unit installed on the inside.

The hopup can also be removed if required or can be stand alone without the flash hider.

The IHOBBY Aluminium threaded hop up is the latest and greatest style hop up with an updated design to allow for accuracy never before seen in the gel ball industry. This hop up is not only threaded to fit your pistol adaptors, rifles and anything else with a 14mm thread but it also has 6 variations of accuracy lips to choose from to suit your replica of choice.

Compatibility & Material

• Material: Aluminium
• Colour: black or bronze
• Compatibility : 8.5mm inner barrel and 9.5mm inner barrel

This Hop Up fit Gel blasters out barrel 14mm reverse threads and fit 19 mm straight-in Suppressor.

IMPORTANT INFORMATION

Always use the appropriate eye wear and take all reasonable safety precautions when using our products.

Soaking & Storage of Gels

When soaking the gels, they need to be soaked fully submerged in warm water from the tap for a minimum of 4-6 hours.

Once they have fully grown you can leave them in the water and keep them in or out of the refrigerator.

When you are ready to use them just drain off any excess water with a strainer before you feed them into the mag but do not dry them as they need to be lubricated to work properly.

DISCLAIMER

Do not upgrade any part of your toy gel blaster as this will void the warranty. Upgrades refer to pulling any of the blaster apart or opening it up, changing springs or upgrading the battery from 7.4v to an 11.v battery.