How To Grow Gels
- Clean water. Demineralised water is best (available from Bunnings), clean tap water is fine but you should avoid using rainwater. Bottled water is also a great option.
- Something to grow the gels in. This could be a bucket, eski or any kind of tub that can hold at least 3 litres of water.
- Something to store the gels in. Airtight containers are best from any super market or home ware store.
- A sieve or sifter to drain the water from gels prior to use.
- Optional (for best results): A fish tank filter and pump to keep the water agitated during the grow.
- For Ultras: A timer, whether it be your phone or clock.
- Optional: A food thermometer.
Ausgel Armour Tech Ultra Gels (Standard and Strawberry Milkshake)
Ultra gels are designed for use in modified blasters pushing above 300 fps.
Step 1: Pour at least 2 litres of CLEAN water into your grow container then add 1 packet of Armour Tech Ultra/Pink/Red gels.
Step 2: Allow the gels to grow as per below:
- 3 - 3.5 hours - for 7.3mm sized gels
- 4 hours + for 7.4mm sized gels
Step 4: Remove the gels from water. They are now ready for use in your gel blaster.
Step 5: AT Ultra gels should be stored in an airtight container, away from heat sources or direct sunlight. If the container is not airtight, the gels will deform. They can be stored for further use for up to 6 months. Pink and Red Ultras can be stored in water.
Ausgel Armour Tech White Pearl
Step 1: Pour at least 2 litres of CLEAN water into your grow container, then add 1 packet of Armour Tech White Pearl gels (in dry form).
Step 2: Allow gels to grow as per below:
- 1 Hour for 6mm gels
- 1.5 Hours for 6.9 – 7.1mm gels
- 3.5 Hours for 7.2 – 7.5mm gels (RECOMMENDED)
Step 3: Remove gels from water – they are now ready to use in your gel blaster.
Notes: If using in a CO2 Blaster, white pearls should be used within 48 hours. White pearls that have been grown for 3 hours or less, should be stored in an airtight container. Gels grown for 3.5 hours or more can be stored in water, but will swell to 7.5-7.6mm and lose some strength, so it is recommended to grow the White Pearl gels for same or next day use.
Ausgel Armour Tech (White/Yellow/Green) Gels
This range of gels is designed for use in all blasters up to 320 fps.
Step 1: Pour at least 3 litres of CLEAN water into your grow container. Water should be at 21 - 23 degrees if possible.
Step 2: Pour 1 packet of AT Gels into the CLEAN water.
Step 3: Allow the gels to grow for at least 4 hours.
Step 4: Remove the gels from water using a sieve. They are now ready for use in your gel blaster.
Step 5: Armour Tech Green/Yellow/White gels can be stored dry in an airtight container, or submerged in water, for further use for up to 6 months. If storing in water, change the water weekly.
Ausgel Super (White/Blue/Orange/Pink) Gels
This range of gels is designed for use in all blasters up to 300 fps and are slightly more consistent than original gels.
Step 1: Pour at least 3 litres of CLEAN water into your grow container. Water should be at 21 - 23 degrees if possible.
Step 2: Pour 1 packet of Super Gels into the CLEAN water.
Step 3: Allow the gels to grow for at least 4 hours.
Step 4: Remove the gels from water using a sieve. They are now ready for use in your gel blaster.
Step 5: Super gels should be stored submerged in water, for further use for up to 4 months. Remember to change the water weekly.
Ausgel Original Hardened (Green/Blue/Orange) Gels
This range of gels is designed for use in all blasters up to 300 fps and are perfect for use as hire blaster gels for fields.
Step 1: Pour at least 2 litres of CLEAN water into your grow container. Water should be at 21 - 23 degrees if possible.
Step 2: Pour 1 packet of Original Gels into the CLEAN water.
Step 3: Allow the gels to grow for at least 3 hours 30 minutes.
Step 4: Remove the gels from water using a sieve. They are now ready for use in your gel blaster.
Step 5: Original gels should be stored submerged in water, for further use for up to 12 months. Remember to change the water weekly.
